View G220SW02-V0_1554712.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

produktspezifikation fr auo g220sw02 v0 im programm von achtung: dieses dokument unterliegt ni cht dem ?nderungsdienst. der stand entspricht der drucklegung. bitte informieren sie sich vor verwendung ob die technischen daten noch dem aktuellen stand entsprechen. trotz sorgf?ltiger kontrolle k?nnen wir leider keine haftung fr druckfehler oder irrtmer bernehmen. www..net
au optronics corporation product specification document version 0.2 1 g220sw02 v0 preliminary specification final specification module 22? wsxga+ color tft-lcd model name g220sw02 v0 customer date checked & approved by note: this specification is subject to change without notice. approved by date debbie chiu 2010/06/30 prepared by jimmy tsai 2010/06/30 general display business division / au optronics corporation
au optronics corporation product specification document version 0.2 2 g220sw02 v0 contents 1. operating precautions ........................... ................................................... ........4 2. general description ............................. ................................................... ..........5 2.1 display characteristics ........................ ................................................... ........................... 5 2.2 optical characteristics........................ ................................................... ............................ 6 3. functional block diagram ........................ ................................................... ...10 4. absolute maximum ratings........................ ................................................... .11 4.1 absolute ratings of tft lcd module ............. ................................................... ..............11 4.2 absolute ratings of environment ................ ................................................... ..................11 5. electrical characteristics...................... ................................................... .......12 5.1 tft lcd module ................................. ................................................... ......................... 12 5.2 backlight unit................................. ................................................... ............................... 14 6. signal characteristic........................... ................................................... .........17 6.1 pixel format image ............................. ................................................... ......................... 17 6.2 signal description............................. ................................................... ............................ 18 6.3 the input data format .......................... ................................................... ....................... 19 6.4 interface timing ............................... ................................................... ............................. 20 6.5 power on/off sequence.......................... ................................................... .................. 21 6.6 3d activity.................................... ................................................... ................................. 22 7. connector & pin assignment ...................... ................................................... 23 7.1 tft lcd module: lvds connector ................. ................................................... ............ 23 7.2 backlight unit: led connector .................. ................................................... ................... 24 8. reliability test ................................ ................................................... ..............25 9. mechanical characteristics ...................... ................................................... ...26 10. label and packaging............................ ................................................... ......28 10.1 shipping label (on the rear side of tft-lcd di splay)............................................. ...... 28 10.2 carton package................................ ................................................... .......................... 28 11. safety ......................................... ................................................... .................29 11.1 sharp edge requirements....................... ................................................... ................... 29 11.2 materials ..................................... ................................................... ................................ 29 11.3 capacitors.................................... ................................................... ............................... 29 11.4 national test lab requirement................. ................................................... .................. 29
au optronics corporation product specification document version 0.2 3 g220sw02 v0 record of revision version and date page old description new description remark 0.1 2010/05/03 all first edition preliminary specifications 0.2 2010/06/30 all second edition preliminary specifications
au optronics corporation product specification document version 0.2 4 g220sw02 v0 1. operating precautions 1) display area (polarizer) of tft-lcd module is ea sily to be damaged, please be cautious and not to scratch it. 2) be sure to power off your machine before connect ing or disconnecting your signal cable to tft-lcd module. 3) wipe off water drop on display area immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or soft cloth. 5) display area (glass) of tft-lcd module may be br oken or cracked if bump module against hard object. 6) to avoid esd (electro static discharde) damage, be sure to ground yourself before handling tft-lcd module. 7) do not open nor modify the tft-lcd module assemb ly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if tft-lcd module has to be put back int o the packing container slot after it was taken out from the container, do not press the center of the led reflector edge. instead, press at the far ends of the led reflector edge softly. otherwis e the tft-lcd module may be damaged. 10) when inserting or removing of your signal cable to tft-lcd module, be sure not to apply abnormal force (rotate, tilt? etc.) to the connector of the tft-lcd module. 11) tft-lcd module is not allowed to be twisted & b ent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) small amount of materials without flammability grade are used in the tft-lcd module. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemptio n. 13) severe temperature condition may result in diff erent luminance, response time. 14) continuous operating tft-lcd module under high temperature environment may accelerate led light bar exhaustion and reduce luminance drama tically. 15) the data on this specification sheet is applica ble when tft-lcd module is placed in landscape position. 16) continuous displaying fixed pattern may induce image sticking. it?s recommended to use screen saver or moving content periodically if fixe d pattern is displayed on the screen.
au optronics corporation product specification document version 0.2 5 g220sw02 v0 2. general description this specification applies to the 22 inch-wide colo r tft-lcd module g220sw02 v0. the display supports the wsxga+ (1680(h) x 1050(v)) screen format and 16.7m colors. all input signals are lvds interface compatible. led driver board of backlight is included. g220sw02 v0 is designed for industrial display appl ications. 2.1 display characteristics the following items are g220sw02 v0 characteristics summary at 25 (room temperature). items unit specifications screen diagonal [inch] 22 active area [mm] 473.76 (h) x 296.1(v) pixels h x v 1680x3(rgb) x 1050 pixel pitch [mm] 0.282x 0.282 pixel arrangement r.g.b. vertical stripe display mode tn mode,normally white nominal input voltage vdd [volt] +5.0 v typical power consumption [watt] tbd weight [grams] 3500(typ) physical size [mm] 493.7(w) x 320.1(h) x 22.5(d) (typ) electrical interface dual channel lvds surface treatment hard-coating (3h), glare type support color 16.7m colors (6-bits + hifrc) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance
au optronics corporation product specification document version 0.2 6 g220sw02 v0 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature): item unit conditions min. typ. max. note 2d mode 240 300 - 1 white luminance [cd/m2] 3d mode 100 120 - 1 uniformity % 9 points 75 80 - 1, 2, 3 contrast ratio 800 1000 - 4 2d mode - - 1.5 5 cross talk % 3d mode - - 5 8 rising - 15 20 falling - 10 15 response time [msec] rising + falling - 25 35 6 [degree] [degree] horizontal (right) cr = 10 (left) 80 80 85 85 - - viewing angle (2d) [degree] [degree] vertical (upper) cr = 10 (lower) 75 75 80 80 - - 7 red x tbd tbd tbd red y tbd tbd tbd green x tbd tbd tbd green y tbd tbd tbd blue x tbd tbd tbd blue y tbd tbd tbd white x 0.260 0.310 0.360 color / chromaticity coordinates (cie 1931) white y 0.280 0.330 0.380 color gamut % 72 -
au optronics corporation product specification document version 0.2 7 g220sw02 v0 note 1: measurement method equipment pattern generator, power supply, digital voltmeter, luminance meter (sr_3 or equivalent) aperture 1 with 50cm viewing distance test point center environment < 1 lux note 2: definition of 9 points position (display ac tive area : 473.76(h) x 296.10(v)) note 3: the luminance uniformity of 9 points is def ined by dividing the minimum luminance values by th e maximum test point luminance note 4 definition of contrast ratio (cr): minimum brightnes s of nine poin ts w9 = m aximum brightness of nine points contrast ratio (cr)= brightness on the ?white? state brightness on the ?black? sta te 50 % 90 % 90 % 50 % 10 % 10 % lcd module sr_3 or equivalent measuring distance module driving equipment
au optronics corporation product specification document version 0.2 8 g220sw02 v0 note 5 definition of cross talk (ct) ct = | yb ? ya | / ya 100 (%) where ya = luminance of measured location without gray le vel 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) note 6: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?white? to ? black? (falling time) and from ?black? to ?white? (rising time), respectively. the response time interval is between 10% and 90% of amplitudes. please refer to the figure as be low. note 7: definition of viewing angle viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180 horizontal a nd 180 R vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as below: 90 ( ) horizontal left and right, and 90 ( ) vertical high (up) and low (down). the measuremen t direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desired measurement viewing a ngle. 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a? b? 127 gray level 127 gray level 0 gray level
au optronics corporation product specification document version 0.2 9 g220sw02 v0 note 8: definition of 3d cross talk refer to note 7, cross talk detecting range is defi ned +/-30 ( ) horizontal left and right and 0 ( ), under maximum luminance of view 3 at +/-10 ( ), 3d cross talk is defined as cross talk (%) = (%) 3 5 1 view view view +
au optronics corporation product specification document version 0.2 10 g220sw02 v0 3. functional block diagram the following diagram shows the functional block of the 22 inches wide color tft-lcd module: lvds connector: hirose (mdf76urw-30s-1h) or equivalent. led connector: hirose ( df14h-20p-1.25h(56) ) or equivalent. led b/l connector lvds timing controlle r led driver au asic 5.5v gamma correction lvds dc/ dc converter tft-lcd 1680(3)*1050 pixels g1 g1050 d1 d5040 gate driver ic source driver ic connecter dc power, 12v barrier cell 3d on/off, 3.3v 60hz
au optronics corporation product specification document version 0.2 11 g220sw02 v0 4. absolute maximum ratings 4.1 absolute ratings of tft lcd module item symbol min max unit logic/lcd drive voltage v dd - 0.3 + 5.5 [volt] 4.2 absolute ratings of environment item symbol min max unit operating temperature top 0 +50 [ o c] operation humidity hop 5 90 [%rh] storage temperature tst -20 +60 [ o c] storage humidity hst 8 90 [%rh] note: maximum wet-bulb should be 39 and no condensa tion. operating range storage range
au optronics corporation product specification document version 0.2 12 g220sw02 v0 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 4.5 5.0 5.5 [volt] 10% idd vdd current - 1000 1400 [ma] vdd= 5.0v, all black pattern at 60hz i rush lcd inrush current - - 2.5 [a] note 1 pdd vdd power - 5 7 [watt] vdd= 5.0v, all black pattern at 60hz note 1: measurement condition: +5.0v +12.0v vcc r1 47k r2 1k vr1 47k sw1 sw mag-spst 1 2 f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vdd rising time 0v 5.0v 0.5ms
au optronics corporation product specification document version 0.2 13 g220sw02 v0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd i s off. note: lvds signal waveform symbol item min. typ. max. unit remark vth differential input high threshold - - 100 [mv] vcm=1.2v vtl differential input low threshold -100 - - [mv] vcm=1.2v vid input differential voltage 100 400 600 [mv] vicm differential input common mode voltage 0.3 - 1.25 [v] vth/vtl= 100mv vth vid vtl vicm vss
au optronics corporation product specification document version 0.2 14 g220sw02 v0 5.2 backlight unit 5.2.1 led light bar following characteristics are measured under stable condition at 25 (room temperature) . 2d mode: symbol parameter min typ max unit remark i f led forward current - 70 ma ta = 25 o c - 32.4 - volt i f = 70ma, ta = 0 o c - 31.5 36 volt i f = 70ma, ta = 25 o c v f led forward voltage - 29.7 - volt i f = 70ma, ta = 50 o c p led led power - 2.2 2.5 watt one string, i f = 70ma, ta = 25 o c operating life 50,000 hrs i f = 70ma, ta = 25 o c 3d mode: symbol parameter min typ max unit remark i f led forward current - 120 ma ta = 25 o c - 32.4 - volt i f = 120ma, ta = 0 o c - 31.5 36 volt i f = 120ma, ta = 25 o c v f led forward voltage - 29.7 - volt i f = 120ma, ta = 50 o c p led led power - 3.8 4.3 watt one string, i f = 70ma, ta = 25 o c operating life tbd hrs i f = 120ma, ta = 25 o c, ti au optronics corporation product specification document version 0.2 15 g220sw02 v0 note 5: ti = temp. on below position.
au optronics corporation product specification document version 0.2 16 g220sw02 v0 5.2.2 led driver board (embedded) following characteristics are measured under stable condition at 25 (room temperature) . 2d mode: symbol parameter min. typ. max. unit remark vcc input voltage - 12 12.6 [volt] i f = 70ma, ta = 25 o c i vcc input current - 1.2 1.5 [a] 100% pwm duty p vcc power consumption - 14.4 18.9 [watt] 100% pwm duty i rush led inrush current - - 1.5 [a] at rising time=470us f pwm dimming frequency 100 - 10k [hz] swing voltage 3 3.3 5.5 [volt] dimming duty cycle 10 - 100 % 3d mode: symbol parameter min. typ. max. unit remark vcc input voltage - 12 12.6 [volt] i f = 120ma, ta = 25 o c i vcc input current - 2.3 2.6 [a] 100% pwm duty p vcc power consumption - 28 32.76 [watt] 100% pwm duty i rush led inrush current - - 1.5 [a] at rising time=470us f pwm dimming frequency 100 - 10k [hz] swing voltage 3 3.3 5.5 [volt] dimming duty cycle 10 - 100 %
au optronics corporation product specification document version 0.2 17 g220sw02 v0 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the inpu t signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1 67 9 1 68 0 1st line 105 0 line
au optronics corporation product specification document version 0.2 18 g220sw02 v0 6.2 signal description the module using a pair of lvds receiver sn75lvds82 (texas instruments) or compatible. lvds is a differ ential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds 83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels wh ile the second lvds port(rxexxx) transmits even pixels. pin # signal name description 1 rxino0- negative lvds differential data input (od d data) 2 rxino0+ positive lvds differential data input (od d data) 3 rxino1- negative lvds differential data input (od d data) 4 rxino1+ positive lvds differential data input (od d data) 5 rxino2- negative lvds differential data input (od d data, h-sync, v-sync, dsptmg) 6 rxino2+ positive lvds differential data input (od d data, h-sync, v-sync, dsptmg) 7 gnd power ground 8 rxoclkin- negative lvds differential clock input (odd clock) 9 rxoclkin+ positive lvds differential clock input (odd clock) 10 rxino3- negative lvds differential data input (o dd data) 11 rxino3+ positive lvds differential data input (o dd data) 12 rxine0- negative lvds differential data input (e ven data) 13 rxine0+ positive lvds differential data input (e ven data) 14 gnd power ground 15 rxine1- positive lvds differential data input (e ven data) 16 rxine1+ negative lvds differential data input (e ven data) 17 gnd power ground 18 rxine2- negative lvds differential data input (e ven data) 19 rxine2+ positive lvds differential data input (e ven data) 20 rxeclkin- negative lvds differential clock input (even clock) 21 rxeclkin+ positive lvds differential clock input (even clock) 22 rxine3- negative lvds differential data input (e ven data) 23 rxine3+ positive lvds differential data input (e ven data) 24 gnd power ground 25 nc no contact (for auo test only) 26 nc no contact (for auo test only) 27 nc no contact (for auo test only) 28 vdd +5.0v power supply 29 vdd +5.0v power supply 30 vdd +5.0v power supply
au optronics corporation product specification document version 0.2 19 g220sw02 v0 6.3 the input data format note1: 8-bits signal input. note2: l:ns alike h:thine alike
au optronics corporation product specification document version 0.2 20 g220sw02 v0 6.4 interface timing 6.4.1 timing characteristics signal item symbol min typ max unit clock frequency 1/ t clock 60 72.1 85 mhz frame rate frequency 1/tv 50 60 75 hz period t v 1058 1066 2048 active t vd 1050 1050 1050 vertical section blanking t vb 8 16 998 t_line period t h 880 1128 2048 active t hd 840 840 840 horizontal section blanking t hb 40 288 1208 t_clock note: de mode only. 6.4.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1
au optronics corporation product specification document version 0.2 21 g220sw02 v0 6.5 power on/off sequence vdd power and lamp on/off sequence is as below. int erface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 [ms] t2 0 40 50 [ms] t3 200 - - [ms] t4 200 - - [ms] t5 0.5 16 50 [ms] t6 - - 100 [ms] t7 1000 - - [ms] the above on/off sequence should be applied to avoi d abnormal function in the display. please make sur e to turn off the power when you plug the cable into the input co nnector or pull the cable out of the connector. t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vdd lvds signal backlight on
au optronics corporation product specification document version 0.2 22 g220sw02 v0 6.6 3d activity 6.6.1 3d data arrangement 3d data arrangement shown as below. 2d resolution 1680 x 3 x 1050, for 5 view content, view number = 1, 2, 3, 4, 5, 6.6.2 how to turn on 3d mode 2d mode: pin 19 th : ground 3d mode: pin 19 th : input 3.3v, dc, pull high led connector pin defines pin # signal name description 19 3d_en 3d enable, 3.3v
au optronics corporation product specification document version 0.2 23 g220sw02 v0 7. connector & pin assignment physical interface is described as for the connecto r on module. these connectors are capable of accomm odating the following signals and will be following components. 7.1 tft lcd module: lvds connector connector name / designation interface connector / interface card manufacturer lvds: hirose/ jae or compatible type part number lvds :mdf76urw-30s-1h/ fi-xb30ssrl-hf16 mating housing part number fi-x30s-h ( unlocked typ e ) or equivalent pin# signal name pin# signal name 1 rxino0- 16 rxine1+ 2 rxino0+ 17 gnd 3 rxino1- 18 rxine2- 4 rxino1+ 19 rxine2+ 5 rxino2- 20 rxeclkin- 6 rxino2+ 21 rxeclkin+ 7 gnd 22 rxine3- 8 rxoclkin- 23 rxine3+ 9 rxoclkin+ 24 gnd 10 rxino3- 25 nc 11 rxino3+ 26 nc 12 rxine0- 27 nc 13 rxine0+ 28 vdd 14 gnd 29 vdd 15 rxine1- 30 vdd
au optronics corporation product specification document version 0.2 24 g220sw02 v0 7.2 backlight unit: led connector connector name / designation lamp connector manufacturer hirose / entery or compatible connector model number df14h-20p-1.25h(56) / 3804-e 20e05 mating model number df14-20s-1.25c or compatible pin # signal name description 1 v12_1 light bar 1 input voltage, 12v 2 v12_1 light bar 1 input voltage, 12v 3 v12_1 light bar 1 input voltage, 12v 4 v12_1 light bar 1 input voltage, 12v 5 v12_2 light bar 2 input voltage, 12v 6 v12_2 light bar 2 input voltage, 12v 7 v12_2 light bar 2 input voltage, 12v 8 v12_2 light bar 2 input voltage, 12v 9 gnd ground 10 gnd ground 11 gnd ground 12 gnd ground 13 gnd ground 14 gnd ground 15 bl_dim_a back light dimming, 0~5v 16 bl_en back light enable, 5v 17 gnd ground 18 bl_dim_p back light dimming, 100-10khz 19 3d_en 3d enable, 3.3v 20 gnd ground
au optronics corporation product specification document version 0.2 25 g220sw02 v0 8. reliability test environment test conditions are listed as following table. items required condition note temperature humidity bias (thb) ta= 50 , 80%rh, 300hours 3 high temperature operation (hto) ta= 50 , 300hours 3 low temperature operation (lto) ta= 0 , 300hours 3 high temperature storage (hts) ta= 60 , 300hours low temperature storage (lts) ta= -20 , 300hours vibration test (non-operation) acceleration: 1.5 g wave: random frequency: 10 - 200 - 10 hz sweep: 30 minutes each axis (x, y, z) shock test (non-operation) acceleration: 50 g wave: half-sine active time: 20 ms direction: x, y, z (one time for each axis) drop test height: 60 cm, package test thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles 1, 3 on/off test on/10sec, off/10sec, 30,000 cycles 3 contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point. esd (electrostatic discharge) air discharge: 15kv, 150pf(330 ) 1sec 8 points, 25 times/ point. 2 altitude test operation:10,000 ft non-operation:30,000 ft 3 note 1: the tft-lcd module will not sustain damage after being subjected to 100 cycles of rapid temper ature change. a cycle of rapid temperature change consists of var ying the temperature from -20 to 60 , and back again. power is not applied during the test. after tempera ture cycling, the unit is placed in normal room amb ient for at least 4 hours before power on. note 2: according to en61000-4-2 , esd class b: som e performance degradation allowed. no data lost. self-recoverable. no hardware failures. note 3: the test is under this condition, led curre nt is 70 ma.
au optronics corporation product specification document version 0.2 26 g220sw02 v0 9. mechanical characteristics
au optronics corporation product specification document version 0.2 27 g220sw02 v0
au optronics corporation product specification document version 0.2 28 g220sw02 v0 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package max capacity: 22 tft-lcd module per carton (8pcs * 1 layers) max weight: 26 kg per carton outside dimension of carton: 562(l)mm* 275(w)mm* 42 6(h)mm g220sw02 v0
au optronics corporation product specification document version 0.2 29 g220sw02 v0 11. safety 11.1 sharp edge requirements there will be no sharp edges or comers on the displ ay assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhe re in the display module. if toxic materials are us ed, they will be reviewed and approved by the responsib le auo toxicologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating except ion approval process. the printed circuit board will be made from materia l rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board . 11.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them fro m being inserted backwards. 11.4 national test lab requirement the display module will satisfy all requirements fo r compliance to: ul 1950, first edition u.s.a. information technology equipment

▲Up To Search▲

Price & Availability of G220SW02-V0

	To Download G220SW02-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .